- Vacuum Annealing Furnace 1800¡ãC
- Vacuum Sintering Furnace
- Heat Treatment Furnace
- Drop Bottom Sintering Furnace
- Car Bottom Furnace
- Roller Hearth Furnace
- Mesh Belt Furnace
- Continuous Mesh Belt Furnace
- Ceramic Tiles Roller Furnace
- Roller Kiln
- Industrial Kilns
- Shuttle Kiln
- Tunnel Kilns
- Bogie Hearth Furnaces
- Rotary Kilns
- Pusher Kilns
- Ceramic Roller Kilns
- Sintering Furnace
- Annealing Furnace
- Vacuum Heat Treatment Furnace
- Vacuum Hardening Furnace
- Tempering Furnace
- Continuous Heating Furnace
- Crucible Furnace
- Glass Melting Furnace
- Muffle Furnace
- Gold Melting Furnace
West Of Kelong South Road, Luoxin Industrial Park, Xinan County, Luoyang, Henan, China.
+86-379-60193738
Drop Bottom Sintering Furnace
- Brand Name: Luwei
- Model: 1600C Electric drop bottom loading furnace
- Max.Temperature: 1600°C
- Working Temperature: 1600°C
- Furnace Chamber Size: 500*500*500MM
- Temperature Controller: PID and SCR
- Control Accuray: ± 1°C
- Heating Element: MoSi2 rods
- Thermocouple: B type
- Chamber Material: High purity Ceramic fiber
Luwei Furnace supplies electrical Drop Bottom Furnaces which are intended for solution heat treatment of Aluminum parts. Drop Bottom Sintering Furnaces integrate solution heat treatment and quenching into one controllable operation. There are manufactured in various sizes according to the customer requirements.
1600°C Electric Drop Bottom Furnace is mainly used in the experiment and production of ceramics glasschemical industry electronics metallurgy, new material, development machinery refractories, building materials, special materials and other products. Loading from bottom Lifting bottom controlled by electric freely lift. Up and down limited switch double safety for bottom moving.
The 1600C Electric drop bottom loading furnace is one of the type of Luwei Drop Bottom Sintering Furnace, Drop-bottom aluminum heat treat furnaces are used to solution heat treat aluminum alloys. 1600C Electric drop bottom loading furnace is High purity alumina fiber insulation and Morgan materials brick.
The temperature Category: 1200°C 1400°C 1600°C 1700°C 1800°C.
Technical Specifications of Drop Bottom Sintering Furnace |
|
Chamber size |
500x500*500mm (Width * Height * Depth) (8 Liter) |
Max. temperature |
1600°C (<2hour) |
Working temperature |
1500°C |
Temperature controlling |
PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor. |
16 programmable segments for precise control of heating rate, cooling rate and dwell time. |
|
Built in PID Auto-Tune function with overheating & broken thermocouple broken protection. |
|
Over temperature protection and alarm allows for operation without attendant. |
|
Temperature accuracy |
±1°C |
Temperature Uniformity |
±5°C |
Heating rate |
0-15°C/min |
Thermocouple |
B type with 99.7% purity Alumina tube |
Heating element |
MoSi2 heating elements |
Furnace Chamber |
Three layers of ceramic fiber insulation materials |
Furnace structure |
Double layer steel casing with dual cooling fan, surface temperature below 60°C |
Furnace door |
Front-side open |
Power cutting off when furnace door open |
|
Working voltage |
220V or 380V, 50HZ or 60HZ |
Rated power |
30 KW |
N.W/G.W |
800KG/1000KG |
Stander chamber size (mm)customize |
500*300*200 500*400*400 500*500*500 600*500*500 800*800*800 1000*800*800 1000*1000*1000 1200*1200*1200 1500*1000*1000 |